Friday, August 31, 2012

FORD RACING COYOTE ALUMINUM 5.0 CRATE ENGINE M-6007-M50B MUSTANG COBRA BOSS 302

302 Corba Jet



ugly:::

FORD RACING COYOTE ALUMINUM 5.0 CRATE ENGINE M-6007-M50B MUSTANG COBRA BOSS 302


Ford Racing's aluminum 5.0L Mustang Boss 302 crate engine takes the Ti-VCT 5.0L engine to the next level of performance with high flow CNC cylinder heads and revised intake to deliver 444 horsepower and 380 ft.-lb.+ of torque (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. For the track, the oil pan features a large sump 8.5 qt capacity with revised oil pan baffling for improved oil control under hard cornering.
  • 444 hp @ 7400 RPM
  • 380 lb-ft of torque @ 4500 RPM
  • High-performance 5.0-liter, four-valve Ti-VCT engine
  • Displacement 302 cu. in. 
  •  3.63 bore x 3.65-in stroke
  • Aluminum block 
  • Forged steel crankshaft
  • Upgraded sinter-forged connecting rods for improved strength
  • Forged aluminum pistons
  • Aluminum cylinder heads, DOHC, four valves per cylinder, variable intake, variable camshaft timing, 
  • High-strength aluminum-alloy cylinder heads with fully CNC-machined ports and chambers for exceptional high-rpm airflow without sacrificing low-speed torque 
  • Sodium-filled exhaust valves for improved heat dissipation
  • 11.0:1 compression ratio
  • Revised composite intake system with shorter runners, inspired by Ford Racing's Daytona Prototype engine program
  • 80 mm single bore "drive by wire" throttlebody
  • Includes manual transmission engine harness and flywheel
  • Vehicle harness and PCM not included
  • Boss 302 crate engine shown with optional Ford blue coil pack covers FRPP part # : M-6P067-M50B and NVH insulator pads, Ford dealer part # :CR3Z-6N041-A. sold separately.
  • Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.
  • Photo and specs may vary. 
  • Engine weight: 444 lbs



No comments:

Post a Comment