Model A Ford Tool Kit Early 1928

Model A Ford Tool Kit  ORIGINAL Early 1928 for passenger car & pick-up. This complete Show Quality tool kit includes all ORIGINAL FORD Factory tools ,  including A jack # 17080- by  Walker flip-top a carry-over from Model T, in excellent working condition, it is painted with black enamel and is in MINT Condition . The  jack handle  16" long is a spoon shaped tire iron with 7/16" hole punched in the other this also Mint condition.

 

 The adjustable wrench shows the small Ford script  embossing at the very top ,the early open end wrenches  have only the Ford Script on one side and a makers mark on the other ,all, are in perfect condition.   The pliers shows the large ford script with 1 1/4" jaw also in perfect cond. The Tire pump with the Ford Script on the right side and hose inlet on the other is stamped on the bottom with T-1434 it has the cast iron base and cast iron screw top, in working condition has ,  an excellent reproduction hose  with Original clamps and nozzle. The hose is assembled at the base with the Original brass hose inlet and a red hard paper gasket.   The Alemite grease gun in good condition with a deep alemite stamping, also included is copy of the Alemite booklet. The screwdriver is in excellent condition. The tire iron 10" long, the first used with the model a (a carry over from model T) , and spark plug wrench ( type III with 3/4" thick box end does  have a script)  are also in excellent condition.   The Ford Instruction Manual Early 1928 # 3  Book ,  showing the early style squeeze grip center emergency brake handle and mushroom style gear shift knob.The book is in  good Condition , showing some soiling on the  cover and some water staining at the back of the book.  .  The Tool Bag is in  rough condition, this is the earliest type and Very Rare, the material appears to be a black pebble grain artificial leather,It has a  one snap common sense twist type in the center  . The hand crank is the very first one supplied with the 1928 model  A. The socket end has the 1" outside diameter while the lug end has the pinched or under cut end. Also each bend is 90 degrees as the later versions have 106 degrees. This Tool Kit is Ready for Display with your Blue Ribbon Show Car.